Inputs

Healthcare area m2 Enter a numeric project value in m2 at or above 0.01. Target illuminance lux Enter a numeric project value in lux at or above 0.01. Face/task positions Enter a numeric project value between 0 and 10000. Hygiene product context recorded Tick when this condition applies or the record is available. Luminaire lumens lm Enter a numeric project value in lm at or above 0.01. Luminaire input power W Enter a numeric project value in W at or above 0.01. Utilisation factor Enter a numeric project value between 0.01 and 1. Maintenance factor Enter a numeric project value between 0.01 and 1.

Required initial lumens -- lm

Fixture count --

Installed lighting power -- W

Face/task positions --

Calculation details

Required initial lumens: -- lm
Fixture count: --
Installed lighting power: -- W
Face/task positions: --
Professional review required: --

Important notes

Do not treat this worksheet as a compliance result or professional photometric simulation.
Record assumptions, product data, geometry, controls, and review owner before using the result.

Formula

Planning estimator and handoff support only. Outputs must be reviewed against project-specific targets and current Australian requirements.

Estimate healthcare fixture count and professional review prompts from area, target, and hygiene records.

Healthcare and Clinic Lighting Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formula