Inputs

Alfresco area m2 Enter a numeric project value in m2 at or above 0.01. Seating zone area m2 Enter a numeric project value in m2 at or above 0. Target illuminance lux Enter a numeric project value in lux at or above 0.01. Luminaire lumens lm Enter a numeric project value in lm at or above 0.01. Luminaire input power W Enter a numeric project value in W at or above 0.01. Utilisation factor Enter a numeric project value between 0.01 and 1. Maintenance factor Enter a numeric project value between 0.01 and 1. IP rating recorded Tick when this condition applies or the record is available. Nearest sensitive boundary distance m Enter a numeric project value in m at or above 0.

Required initial lumens -- lm

Fixture count --

Installed lighting power -- W

Estimated maintained illuminance -- lux

Calculation details

Required initial lumens: -- lm
Fixture count: --
Installed lighting power: -- W
Estimated maintained illuminance: -- lux
Seating area ratio: --
Boundary review required: --
Product environment review required: --

Important notes

Record product IP rating, switching, shielding, glare, and nearby boundary context before specifying fittings.
Outdoor lighting and electrical installation need project-specific Australian review.

Formulas

\(\displaystyle \Phi = \frac{E \times A}{UF \times MF}\)
Boundary and product prompts are planning support for private outdoor lighting.

Estimate private alfresco fixture quantity, output, and basic boundary or product review prompts.

Alfresco Lighting Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formulas

Related calculators