Inputs

Dimmer output voltage V Enter a numeric project value in V between 1 and 300. Driver input voltage V Enter a numeric project value in V between 1 and 300. Connected load W Enter a numeric project value in W at or above 0.1. Driver minimum load W Enter a numeric project value in W at or above 0. Driver maximum load W Enter a numeric project value in W at or above 0.1. Control protocol Choose the option that best matches the project condition. Dimmer phase-cut type Choose the option that best matches the project condition. Driver phase-cut type Choose the option that best matches the project condition. Manufacturer compatibility confirmed Tick when this condition applies or the record is available.

Voltage match --

Phase-cut match --

Minimum load met --

Maximum load not exceeded --

Compatibility status --

Calculation details

Voltage match: --
Phase-cut match: --
Minimum load met: --
Maximum load not exceeded: --
Basic compatibility result: --
Missing confirmation count: --
Compatibility status: --

Important notes

Confirm the exact dimmer, driver, lamp, neutral arrangement, minimum load, phase-cut behavior, flicker, and manufacturer compatibility list.
Use a licensed electrician for Australian electrical installation decisions; this planner does not certify compatibility.

Formulas

\(\displaystyle P_{\min} \leq P_{\mathrm{load}} \leq P_{\max}\)
\(\displaystyle \mathrm{Compatible} = V_{\mathrm{match}} \land \mathrm{protocol}_{\mathrm{match}} \land \mathrm{load}_{\mathrm{range}} \land \mathrm{manufacturer}_{\mathrm{confirmed}}\)
The matrix is a product-information planning aid, not an electrical compliance determination.

Compare dimmer and driver voltage, protocol, phase-cut, load-range, and manufacturer-confirmation inputs.

Dimmer and Driver Compatibility Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formulas