Inputs

Driveway length m Enter a numeric project value in m at or above 0.1. Driveway width m Enter a numeric project value in m at or above 0.1. Maximum fixture spacing m Enter a numeric project value in m at or above 0.1. Mounting height m Enter a numeric project value in m at or above 0.1. Beam angle deg Enter a numeric project value in deg between 1 and 179. Sensitive boundary clearance m Enter a numeric project value in m at or above 0. Fixture side mode Choose the option that best matches the project condition. Sensitive receiver nearby Tick when this condition applies or the record is available.

Fixtures per run --

Fixture count --

Actual spacing -- m

Beam diameter at driveway plane -- m

Planning prompt --

Calculation details

Fixtures per run: --
Fixture count: --
Actual spacing: -- m
Beam diameter at driveway plane: -- m
Width coverage ratio: -- ratio
Spill and glare review required: --
Planning prompt: --

Important notes

Check vehicle sightlines, glare to drivers and neighbours, boundary spill, switching controls, product IP rating, mounting structure, and cable routes.
Electrical installation, outdoor suitability, and Australian standard or authority requirements need qualified review; this planner makes no automatic compliance claim.

Formulas

\(\displaystyle n = \lceil L/S \rceil\)
\(\displaystyle D = 2h\tan(\theta/2)\)
Private driveway planning is not public road-lighting compliance.

Estimate fixture count, spacing, beam coverage, and spill-review prompts for a private residential driveway.

Driveway Lighting Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formulas