Inputs
Results
Total strip power
--
W
Total strip current
--
A
Minimum feed points by current
--
Recommended feed points
--
Feed planning status
--
Calculation details
- Total strip power
- -- W
- Total strip current
- -- A
- Minimum feed points by current
- --
- Recommended feed points
- --
- Current per feed
- -- A
- Feed planning status
- --
Important notes
- The feed-point count is a planning aid and does not determine cable size, protection, or thermal compliance.
- Use a licensed electrician and the product installation instructions for Australian low-voltage work.
Formulas
- \(\displaystyle I_{\mathrm{total}} = \frac{P_{\mathrm{m}}L}{V}\)
- \(\displaystyle n_{\mathrm{min}} = \left\lceil \frac{I_{\mathrm{total}}}{I_{\mathrm{feed,max}}} \right\rceil\)
- Injection layout must also be checked for voltage drop, connector ratings, heat, and the manufacturer feed limits.
Estimate feed-point count and current distribution for a constant-voltage LED strip run.
LED Strip Injection Point Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.