Inputs

Landscape zones

Add one row for each relevant space, item, zone, document, or measurement set.

Row 1

Zone label Enter the project label, note, or reference used for this calculation. Fixture count Enter a numeric project value between 0 and 10000. Lumens per fixture lm Enter a numeric project value in lm at or above 0. Watts per fixture W Enter a numeric project value in W at or above 0. Boundary distance m Enter a numeric project value in m at or above 0.

Row 2

Total lumens -- lm

Installed watts -- W

Zone count --

Boundary review required --

Calculation details

Total lumens: -- lm
Installed watts: -- W
Zone count: --
Boundary review required: --

Important notes

Do not treat this worksheet as a compliance result or professional photometric simulation.
Record assumptions, product data, geometry, controls, and review owner before using the result.

Formula

Planning estimator and handoff support only. Outputs must be reviewed against project-specific targets and current Australian requirements.

Summarize landscape lighting zones, total output, installed watts, and boundary review prompts.

Landscape Lighting Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formula