Inputs

Luminaires

Add one row for each relevant space, item, zone, document, or measurement set.

Row 1

Type mark Enter the project label, note, or reference used for this calculation. Quantity Enter a numeric project value between 1 and 10000. Lumens per luminaire lm Enter a numeric project value in lm at or above 0.01. Watts per luminaire W Enter a numeric project value in W at or above 0.01. IES file recorded Tick when this condition applies or the record is available. Control type Enter the project label, note, or reference used for this calculation.

Row 2

Circuit count Enter a numeric project value between 0 and 10000. Location plan recorded Tick when this condition applies or the record is available.

Total quantity --

Connected watts -- W

Average efficacy -- lm/W

Missing file count --

Schedule status --

Calculation details

Total quantity: --
Connected watts: -- W
Average efficacy: -- lm/W
Missing file count: --
Schedule status: --

Important notes

Do not use this worksheet as an Australian standards compliance claim.
Record source documents, assumptions, responsible reviewers, and project versions before relying on the handoff.

Formula

Professional worksheet and handoff support only; this calculator does not replace Australian standards interpretation, design certification, or authority review.

Build a luminaire schedule summary from quantities, light output, wattage, photometric files, controls, circuits, and location plans.

Luminaire Schedule Handoff Builder is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formula