Inputs

Path length m Enter a numeric project value in m at or above 0.1. Path width m Enter a numeric project value in m at or above 0.1. Maximum fixture spacing m Enter a numeric project value in m at or above 0.1. Step count Enter a numeric project value at or above 0. Mounting height m Enter a numeric project value in m at or above 0.1. Beam angle deg Enter a numeric project value in deg between 1 and 179. Glare sensitivity Choose the option that best matches the project condition.

Path fixture count --

Step marker count --

Total fixture count --

Actual path spacing -- m

Visibility prompt --

Calculation details

Path fixture count: --
Step marker count: --
Total fixture count: --
Actual path spacing: -- m
Width coverage ratio: -- ratio
Glare and visibility review required: --
Visibility prompt: --

Important notes

Check steps, edges, trip hazards, glare, switching, cable routes, drainage, product IP rating, and nearby sensitive receivers.
Electrical safety, emergency lighting, accessibility, and Australian installation requirements need qualified review; this planner makes no automatic compliance claim.

Formulas

\(\displaystyle n_{\mathrm{path}} = \lceil L/S \rceil\)
\(\displaystyle n_{\mathrm{steps}} = \lceil N_{\mathrm{steps}}/4 \rceil\)
Emergency egress, public paths, and accessibility requirements must be reviewed separately.

Estimate private pathway fixture spacing, step markers, width coverage, and glare-review prompts.

Pathway Lighting Planner is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formulas