Inputs

Path length m Enter a numeric project value in m at or above 0.01. Path width m Enter a numeric project value in m at or above 0.01. Target lux prompt lux Enter a numeric project value in lux at or above 0.01. Indicative pole spacing m Enter a numeric project value in m at or above 0.01. Mounting height m Enter a numeric project value in m at or above 0.01. Luminaire lumens lm Enter a numeric project value in lm at or above 0.01. Luminaire watts W Enter a numeric project value in W at or above 0.01. Utilisation factor Enter a numeric project value between 0.01 and 1. Maintenance factor Enter a numeric project value between 0.01 and 1. Authority context recorded Tick when this condition applies or the record is available.

Path area -- m2

Required initial lumens -- lm

Fixture count --

Professional review required --

Calculation details

Path area: -- m2
Required initial lumens: -- lm
Fixture count: --
Professional review required: --

Important notes

Do not use this result as an Australian standards compliance claim.
Record assumptions, source documents, product data, and responsible reviewer before handoff.

Formula

Technical planning and handoff support only; this worksheet does not replace professional design, commissioning, or compliance assessment.

Create an early pedestrian path lighting handoff summary without claiming compliance.

Public Pedestrian Path Lighting Pre-check is a planning aid. Keep the target source, product data, measurement method, and project assumptions with the result. Confirm compliance, installation, certification, and safety decisions with the responsible professional.

Inputs

Results

Formula