Fixture Schedule Planning Table
Australian lighting schedule table for keeping fitting counts, output, load and control fields together before comparison.
Table PDFFixture Schedule Planning Table
Download the table with the page URL and retrieval date for offline lighting checks.
| Schedule field | Value to list | Where it helps | Boundary |
|---|---|---|---|
| Room or zone name | One room, row, area or task zone per line. | Keeps counts and loads tied to the area being checked. | Do not let one zone line stand for nearby rooms or circulation paths. |
| Fitting count | Rounded count, spare count if allowed, and any row grouping. | Shows how the calculator result became a schedule quantity. | A rounded count still needs spacing, glare and control checks. |
| Luminaire output | Delivered lumens for the complete fitting and any output note. | Links fixture count to maintained-light and replacement comparisons. | Output alone does not confirm light on the assessed plane. |
| Input watts | Rated watts per fitting and total watts for the schedule line. | Supports connected-load and annual energy checks. | Watts describe load, not visible brightness. |
| Mounting and layout note | Mounting height, row centres, edge offsets or aiming note where relevant. | Keeps geometry beside the fitting count that depends on it. | A schedule line is not a detailed lighting layout. |
| Control group | Switching, dimming, sensor or timer group tied to the fittings. | Keeps operating hours and energy checks aligned with the same group. | Different scenes or after-hours states need separate notes. |