AulumensAustralian lighting calculators

Australian lighting tables

Find the structured lookup behind a lighting estimate: units, maintained-light targets, beam geometry, measured readings, source boundaries, load records or driver terms.

Table

Lighting Units Table

Australian English table for lux, lumens, watts, efficacy, beam angle, colour temperature, CRI and related lighting units.

Table

Australian Lux Level Planning Table

Conservative planning ranges for Australian rooms, work areas and circulation spaces, with AS/NZS 1680 context for technical checks.

Table

Beam Angle Coverage Table

Formula-generated beam footprint diameters for common effective mounting heights and beam angles, before any delivered-lux check.

Core calculation tables

Unit definitions, task-plane ranges, lumen allowances, measured-light records and UF/MF assumptions used before calculator results are compared.

Table

Lighting Units Table

Australian English table for lux, lumens, watts, efficacy, beam angle, colour temperature, CRI and related lighting units.

Table

Lighting Calculation Formulas Table

Formula reference for common Australian lighting estimates: lux, lumens, fixture count, connected load, energy, beam spread and daylight factor.

Table

Australian Lux Level Planning Table

Conservative planning ranges for Australian rooms, work areas and circulation spaces, with AS/NZS 1680 context for technical checks.

Table

Room Lumen Target Examples Table

Formula-derived lumen allowance examples for common Australian room sizes, target lux values and delivery factors.

Table

Room Lighting Input Records Table

Room lighting input table for recording area, task plane, target light level and delivery assumptions before estimating lumens.

Table

Task Plane Record Table

Australian lighting table for naming the assessed plane before comparing lux targets, lumen estimates or measured illuminance.

Table

Task, Ambient and Accent Lighting Records Table

Australian lighting record table for separating task, ambient and accent layers before lux, lumen or control comparisons.

Table

Luminaire Output Record Table

Planning record table for keeping luminaire output, watts, optics and maintained-light assumptions traceable in Australian lighting estimates.

Table

Initial vs Maintained Lumens Table

Australian lighting lookup table for separating stated initial output from maintained-light records.

Table

Fixture Schedule Records Table

Australian lighting record table for keeping fitting counts, output, load and control fields together before comparison.

Table

Lumens per Square Metre Table

Formula-derived relationship between lux targets, area and lumen allowance per square metre.

Table

Lux Meter Reading Record Table

Measurement record table for lux meter readings, assessed planes, operating condition and comparison boundaries.

Table

Lux Meter Grid Records Table

Measurement table for recording repeatable lux-meter grid points, planes, conditions and reading boundaries.

Table

Before and After Lux Comparison Records Table

Comparison table for recording before and after lux readings at the same point, plane and lighting condition.

Table

Surface Reflectance Planning Table

Planning table for how ceiling, wall, floor and racking reflectance affects utilisation-factor assumptions.

Table

Maintenance Factor Table

Table rows for maintenance factor assumptions in maintained-lighting calculations.

Table

Utilisation Factor Table

Table rows explaining utilisation factor assumptions for room lighting estimates.

Table

Utilisation and Maintenance Factor Sensitivity Table

Sensitivity table showing how utilisation factor and maintenance factor assumptions move lumen targets in Australian lighting estimates.

Layout and daylight tables

Beam spread, workplane height, downlight spacing, fixture-count rounding and daylight-scale records for set-out notes.

Table

Beam Angle Coverage Table

Formula-generated beam footprint diameters for common effective mounting heights and beam angles, before any delivered-lux check.

Table

Beam Height Multiplier Table

Formula-derived beam diameter multipliers for common beam angles, expressed as diameter per metre of effective height.

Table

Beam Overlap Planning Table

Formula-based comparisons of beam footprint diameter, row spacing and overlap allowance before a delivered-lux check.

Table

Ceiling Height Lighting Effects Table

Australian lighting table for how ceiling height changes beam spread, effective height, utilisation assumptions, glare and high-bay records.

Table

Downlight Set-Out Records Table

Australian downlight set-out table for recording room geometry, beam spread, row spacing and edge notes before ceiling positions are marked.

Table

Downlight Spacing Chart

Formula-generated downlight count, average spacing and beam spread examples for common room sizes.

Table

Fixture Count Rounding Table

Formula-derived examples showing how required lumens, lumens per fitting and rounding affect fixture-count estimates.

Table

Daylight Lux Values Table

Typical daylight illuminance ranges and measurement notes for lighting calculations.

Table

Daylight Factor Examples Table

Example daylight-factor records that pair indoor task-plane readings with same-day outdoor reference readings.

Light quality and environment

Colour appearance, rendering, enclosure language, luminaire markings and outdoor spill or glare boundaries.

Table

Colour Temperature Table

Kelvin ranges for warm white, neutral white and cool white lighting in Australian rooms and work areas.

Table

CRI Ratings Table

Colour rendering bands and planning notes for Australian lighting calculations.

Table

Colour Quality Records Table

Project note records that keep white appearance, CRI or Ra, task context and comparison boundaries separate.

Table

IP Ratings Table for Lighting

IP code structure and common exposure contexts for Australian lighting checks.

Table

Outdoor Lighting Spill and Glare Table

Australian outdoor lighting table for beam aim, spill-light risk, glare checks and project criteria.

Table

Luminaire Markings Table

Common luminaire and lamp markings used in Australian lighting calculations and checks.

Standards, load and control terms

Australian standards directories, emergency/public-space boundaries, retrofit load examples, control records and driver terminology.

Table

Australian Lighting Standards Table

Source map for Australian lighting, enclosure, wiring and energy sources used by this site.

Table

Emergency Lighting Standards Table

Australian source map for emergency lighting, exit signs, AS/NZS 2293 document roles and NCC version notes.

Table

Road Lighting Categories Table

Australian road and public-space lighting category table for AS/NZS 1158 route planning, records and project boundaries.

Table

Workplace Lighting Table Australia

Australian workplace lighting table for task planes, maintained illuminance, glare and calculation records.

Table

LED Wattage Equivalent Table

Approximate old-lamp wattage, lumen output and LED load ranges for Australian lighting estimates.

Table

LED Running Costs Table

Formula-generated kWh and annual cost examples for common LED wattage and run-hour scenarios.

Table

Lighting Power Density Example Table

Formula-derived W/m2 examples for lighting groups, connected load, area and operating-hour notes.

Table

Lighting Control Record Table

Control record table for zones, operating hours, daylight contribution, dimming range and switching assumptions.

Table

Operating Hours Lighting Schedule Table

Annual operating-hour examples from recurring daily, weekly and seasonal lighting schedules.

Table

Connected Load Record Table

Planning-record table for documenting lighting connected load, operating assumptions and energy estimate boundaries.

Table

Annual Lighting kWh Formulas Table

Formula table for turning lighting watts, fitting count and operating hours into annual kWh records.

Table

Lighting Control kWh Assumptions Table

Assumption table for keeping lighting zones, control states, operating hours and kWh boundaries traceable.

Table

Home Lighting Operating Hour Records Table

Home lighting table for separating room, scene, exterior and seasonal operating-hour assumptions.

Table

Business Lighting Energy Records Table

Business lighting table for keeping zone load, operating hours, control state and measured-light boundaries together.

Table

LED Driver Headroom Planning Table

Planning-record table for comparing LED load, driver capacity and headroom assumptions without giving wiring or installation advice.

Table

LED Strip Load Table

Formula-derived LED strip load and driver headroom examples for Australian lighting estimates.

Table

Dimming and Driver Terms Table

Technical lighting control and driver terms for Australian lighting education.